sintering temperature

Sintering temperature has also great influences on fracture characteristic and properties .

烧结温度对断口形貌和力学性能也有较大影响。

Sintering temperature had great effect on the electrochemical properties of the material .

结果表明：烧结温度对于材料的电化学性能影响较大。

These factors were mainly discussed : chemical composition and sintering temperature .

讨论了化学组成、热处理温度对材料的影响。

Sintering temperature was 150 ℃ lower than the traditional powders .

与普通粉末相比，烧结温度降低了150℃。

Sintering temperature is 1440 ℃, sintering time is 1 hour .

烧结制度为1440℃，烧结时间为1个小时。

Researches on Si_3N_4 Growth Dynamics and Simulation on the Sintering Temperature Field

Si3N4的生长动力学研究及其烧制温度场模拟

The relative density result showed that the relative density increased with increasing sintering temperature .

密度测试的结果表明，随着烧结温度的提高，材料的致密度均有所提高。

This method has the characteristic of small pellet high purity and low sintering temperature .

该法具有产物颗粒小、纯度高、烧结温度低等特点；

Coercive force decreases with the increase of the sintering temperature .

磁体的矫顽力随着烧结温度的升高单调下降。

Onset sintering temperature measurement of coal ash using pressure-drop method

压降法测量煤灰的初始粘结温度

Control of the curve of sintering temperature in shuttle kiln

梭式窑烧成曲线的控制

Study of the influence of sintering temperature on the trap distribution of alumina ceramics

烧结温度对氧化铝陶瓷介质陷阱分布的影响

The experimental research on sintering temperature to fe_2o_3 powder sintering density incineration test

烧结温度等参数对Fe2O3粉末烧结密度影响的试验研究

The effect of sintering temperature and period for nanocrystalline NASICON materials

烧结温度和周期对NASICON纳米晶材料的影响

Structural States 、 Sintering Temperature and Thermal Expansion of Cordierite

堇青石的结构状态与合成温度、热膨胀的关系

The effect of the sintering temperature on the degrease performance is obvious .

其中烧结温度对陶粒的性能影响较大。

Effects of Sintering Temperature on the Far Infrared Radiation Properties of Cordierite Ceramics

温度对堇青石系陶瓷远红外辐射性能的影响

Research on the Influence of Sintering Temperature on the Thick Film SrTiO_3 Oxygen Sensor

烧结温度对SrTiO3厚膜氧敏元件的影响研究

The breakdown voltage can be controlled by adjusting sintering temperature and thickness .

调整烧结温度和厚度可控制压敏电压。

1800 ℃ was an ideal sintering temperature for producing high temperature resistant SiC fiber .

1800℃是适宜的制备高耐温性SiC纤维的烧结温度。

Technical parameters were also studied , mainly sintering temperature , formation press , and first milling time .

讨论了多种工艺条件对试样介电性能的影响，主要包括烧结温度、成型压力和一次球磨时间。

Sintering temperature and annealing have no impact on excitation spectrum of thin film .

灼烧温度和退火对薄膜的激发光谱基本没有影响。

Preparation of modified acrylic resin organic carrier used for electron paste of high sintering temperature

改性丙烯酸树脂型高温电子浆料有机载体的制备

The sintering temperature reduce by addition of BN ;

结果表明BN的加入降低了材料的烧结温度；

Sintering Temperature and Sintering Mechanism of SiC Foam Ceramics

碳化硅泡沫陶瓷烧结温度和烧结机理的研究

Its optimum sintering temperature is 1550 ℃, holding time 1 . 5h .

其最佳烧结温度为1550℃，1.5h。

Effect of sintering temperature on phase composition and microstructure of Y_2Ba_4CuNbO_x powder

烧结温度对Y2Ba4CuNbOx粉体物相成分及显微结构的影响

Study on the Sintering Temperature Speciality of GH 30 alloy Wire Netting Material

GH30合金丝网材料烧结温度特性的研究

Influence of Sintering Temperature on Porous SiC Ceramics

烧成温度对SiC多孔陶瓷的影响

The main reason is that with the sintering temperature increase , liquid content increase but porosity reduce .

主要的原因是随着烧成温度的升高，液相含量增加和气孔率减少。